BP Mods Pioneer RTA

• Brand: BP Mods
• Unit: set
• Type: RTA
  
• Net Weight: 60(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

INTRODUCTION

Product introduction

BP Mods Pioneer RTA, a modern and innovative self-winding atomizer with a diameter of 22mm and a tank volume of 3.7ml, can easily fill e-juice from above. With its handy and compact size, stylish design, and diameter, the RTA cuts a perfect figure on almost every Mod and is a real eye-catcher. By default, BP Mods Pioneer RTA comes with a Clear tank tube and a very smooth PEEK drip tip. Two other tank tubes (ULTEM tank tube, PCTG tank tube) and drip tips (ULTEM drip tip, Clear drip tip) are also provided in the package to better customize Pioneer RTA. On the other hand, the build deck is very simple and clean, consisting of two side posts and two tightening screws for fixing a small screwdriver. Pioneer RTA with innovative airflow design, airflow regulation through the 3 pins 510 included in the package: 0,8 mm - 1,2 mm - 1,5 mm. The airflow is partialized instead thanks to the 6-hole ring nut. The air inlet can be adjusted, and the bottom air ring can be switched freely by twisting. On one side, it is a multi-point air intake, and on the other side, it is a long one-hole intake. More suitable for you to switch between mouth-to-lung and direct-to-lung vaping. The Pioneer RTA is particularly suitable for all enthusiastic MTL vapers. For all DL vape trailers, the DL Extension Kit is also available as an accessory, making DL draw with the Pioneer RTA possible.

Parameters

Diameter: 22mm

Height (without 510/DripTip): 33.2mm

Tank Capacity: 3.7ml

Filling: Top filling System

Airflow: Adjustable Bottom Airflow

Air supply adjustable via airflow pins under the winding (0.8 / 1.2 / 1.5mm)

Drip tip: 510 Clear Drip Tip, 510 PEEK Drip Tip, 510 ULTEM Drip Tip

Thread: 510

Colors: Black, Stainless Steel

BP Mods Pioneer MTL/DL RTA 22mm comes with

1 x Pioneer RTA

1 x ULTEM Drip Tip

1 x Clear Drip Tip

1 x PCTG Tank Tube

1 x ULTEM Tank Tube

3 x Airflow 510 Pins

1 x Accessories Pack

1 x User Manual

SPECIFICATION

Features

• 22 mm diameter

• 3.7ml filling volume

• Threaded Top Fill System

• Dual Post Build Deck - 1 Open Terminal Per Post

• Single Coil Configuration

• Conical Flavor Chamber

• Heat Sink Style Top Cap

• Single Deck Vent - Underneath Coil

• Adjustable Bottom Airflow

• 510 Airflow Pin - 3 MTL / Restricted DL Options

• Threaded 510 Connection

• 3 Drip Tips and Tank Tubes included

• MTL to restrictive DL

GUARANTEE

3 Months for Battery/ Mod. Atomizer & Accessories are DOA (Dead On Arrival), please contact us within 72 hours of delivery.

ORDERING TIPS

Package

Simple paper box. Customary Packing from the factory, the packing is subject to change without notice.