detail product

Hotcig RDS Dual System Pod Mod Kit 80W

  • $42.99
  • Ex Tax: $42.99
  • Product Code: M00002028
  • Availability: In Stock

Available Options

Hotcig RDS Dual System Kit

  • Brand: Hotcig
  • Unit: set
  • Type: Pod Mod Kit
  • Net Weight: 70(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.


Hotcig RDS is a single 18650 Dual System Pod Mod device with a clever control wheel, which is a combo of a Pod Kit and a Box Mod. Equipped with the latest HM dual system, its functions are diverse and the interface is easy to use. Adopted ergonomic design, the grip is comfortable. Hotcig RDS provided a full set of accessories in the box, including optimized DL and MTL mesh coils and matched drip tips, 510 thread adapter for Mod System. Whether you are a flavor chaser or a cloud chaser, you own it and you win it! In terms of appearance, the steel frame is covered with a transparent PCTG case. This very light coating is extended to the cartridge and to one of its two drip tips. The Hotcig RDS Kit is powered by a single 18650 battery (not included) installed via the screw-off cover – also suggests that 80W would be the maximum you could get out of the mod. There are multiple user modes to choose from. Within the adjustable modes, the classic is available in the form of power, voltage, bypass, and temperature modes. The specialty is the POD and MOD modes. If we have a pod inserted in the RDS, the mode automatically switches to POD and limits the maximum adjustable power. With MOD mode, RDS behaves like a normal mod and you set the power according to the atomizer used. The fire button and adjustment dial all in one.

The attached Hotcig RDS Pod Cartridge can hold 4.2ml (with DL Drip Tip)/4.5ml (with MTL Drip Tip) e-liquid. The filling port is located to the side of the pod. The base of the pod gives access to the removable coil. Compatible with the new Hotcig RM series coil, bringing an excellent flavor experience. To install the coil is pretty simple, it's just a simple push-fit from the bottom of the pod, you just have to make sure the sides align. Looking at the pod you have a choice of two drip tips that come with the kit. One is a thinner bore vase-shaped drip tip, more suitable for mouth to lung, the other is a more stumpy wide bore drip tip, for direct lung. In addition to standard items, you will also find a very handy and practical 510 adapter, which is inserted into RDS mod instead of a pod and the device can then be used as a classic mod, on which you screw any suitable 510 atomizers with diameter 25mm without overhang.


• Lightweight PCTG construction

• Dual system of Pod and 510 MOD

• Single 18650 with 80W output

• Power/Volt/Bypass/Temp/Pod/MOD modes

• MTL and DL drip tip attached

• Simple side filling design

• Type-C mainstream charging system

• Brand new Hotcig RM Coil Series

• Adjustable Bottom Airflow Control

• 510 Thread Adapter for most 510 tanks

Size (mm):130mm x 41.5mm x 25mm
Material:Stainless Steel+PCTG
Battery:1 x 18650 battery (Not Included)
Output Power:5-80W
Vape Modes:Power/Volt/Bypass/Temp/Pod/MOD
Display:TFT 0.96-inch Color Screen
Capacity:4.2ml (with DL Drip Tip)/4.5ml (with MTL Drip Tip)
Filling:Side Filling
Resistance:DL (RMX 0.15Ω/RM1 0.3Ω/RM2 0.6Ω)
MTL (RM3 1.2Ω)
Charging:Type-C 5V/1A
Colors:Black, Amber, Clear, Purple

1 x Hotcig RDS Device

1 x Hotcig RM Pod (4.2ml)

1 x RM1 Mesh Coil 0.3ohm

1 x RM3 Mesh Coil 1.2ohm

1 x DL Drip Tip

1 x MTL Drip Tip

1 x 510 Thread Adapter

1 x User Manual

1 x USB Type-C Cable

1 x Warranty Card


3 Months for Vape Mods. Vape Tanks & Accessories are DOA(Dead On Arrival), please contact us within 72 hours of delivery.


Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!

Write a review

Note: HTML is not translated!
    Bad           Good